Dukanmu mun san menene ban dariya Ko akalla mun ji labarinsa. Mun san da kyau cewa masu sha'awar wannan nau'in na iya ɗaukar sa'o'i da sa'o'i suna tattara kowane ɗayan waɗannan abubuwan da aka ɗauka zuwa hoton.
Wataƙila tun kafin talabijin, wasan kwaikwayo sun kasance babban tushen nishaɗi, al'amarin da a yau ya daina aiki a irin wannan hanya. Duk da haka, yana yiwuwa a gane hakan wannan kasuwa yayi nisa da bacewaDa kyau, har yanzu akwai abubuwa da yawa a cikin wannan nau'in nishaɗin da ke samun goyon bayan babban rukunin magoya baya.
Koyawa don cimma tasirin ban dariya cikin sauƙi
Don haka, watakila babban ɓangare na waɗannan magoya baya na iya kasancewa daga waɗannan zane buffs Kuma ba don ƙasa ba, tun da duniyar wasan kwaikwayo ta kasance don yawancin canji na al'ada zuwa almara da ban mamaki. Mai ban dariya yana ba mu damar juya yanayi mai sauƙi kamar bayyanar malam buɗe ido zuwa wani abu mai cike da shakku da shakku.
Don haka, don samar da tasirin ban dariya, ya zama dole:
Da zarar Photoshop ya buɗe, za mu zaɓi hoton don gyarawa
Muna yin haka ta hanyar umarni (Fayil>Buɗe), Hakazalika, yana yiwuwa a daidaita matakan hoton idan muna so mu ƙara wani nau'i daban-daban zuwa hoton mu.
Ana iya yin hakan ta hanyar umarni (Hoto> Gyarawa>Mataki).
Tace mai laushi
Na gaba, za mu yi amfani da tasirin nau'in "ba gaskiya ba"zuwa hotonmu, wanda zai ba mu damar ba shi taɓawa ta ƙarshe a ƙarshen lokacin jujjuyawar tasirin sa mai ban dariya.
Don wannan, muna ci gaba zuwa umarni mai zuwa (Tace>Blur>Bluwa mai laushi) kuma da zarar an yi haka, muna amfani da ƙimar da aka gabatar a ƙasa: Rediyo: 50/Treshold: 50/ Quality: Low/Mode: Normal.
Za mu haifar da yadudduka don iyaka da bambanci
Domin wannan mataki, za mu ci gaba da kwafin Layer, don haka muna amfani da umurnin (Ctrl+j) wanda za mu kira iyaka.
Bayan wannan, za mu cire launi ta hanyar umarnin (Hoto> Daidaitacce> Ragewa). Lokacin da muka yi wannan, za mu sake yin kwafi, wanda, don haka, za mu kira wannan sabon Layer bambanci.
Filler don wasan kwaikwayo na mu
Don wannan mataki, za mu ci gaba zuwa halitta mu na ƙarshe Layer. Don yin wannan, za mu ci gaba da zaɓar kowane gefen Layer na mu, sannan mu je kan tashar Channels.
Yi matattara biyu don ban dariya
Bayan 'yan matakai bayan kammala aikin mu, za mu ci gaba a nan don zaɓar Layer 1, don yin amfani da filtata biyu, da su za mu kwaikwayi tasirin ganowa don samar da launi mai ban dariya.
Muna isa ga umarnin (Tace > Tace Gallery) kuma a cikin shingen fasaha za mu zaɓi spots, sannan za mu yi amfani da dabi'u masu zuwa:
Tsawon bugun jini: 10 / Yankin Haskakawa: 15 / Ƙarfin: 10.
Mun danna zabin okey kuma za mu ci gaba da amfani da tacewa ta biyu, tare da umarni mai zuwa (Tace > Tace Gallery) kuma muna cikin toshe bugu don zaɓar zaɓi mai duhu tare da ƙimar:
Ma'auni: 4 / Ƙarfin Baƙi: 0 / Ƙarfin Fari: 6.
Tace, bambanci da iyaka
Za mu zaɓi Layer na iyakoki, sannan mu ci gaba da umarni mai zuwa. Tace > Tace Gallery sa'an nan kuma, a cikin ƙungiyar fasaha za mu zaɓi iyakokin da aka haɗa a ƙarƙashin ƙimar:
Kaurin Iyaka: 10/ Ƙarfin Iyaka: 10/ Bugawa:
Da zarar an gama abin da ke sama kuma ta hanyar umarnin (Ctlr + L), za mu canza matakan shigarwa kuma kamar yadda muke yi a baya, yanzu mun ci gaba zuwa umarni mai zuwa: za mu zabi bambancin Layer kuma muna zuwa (Tace> Salon> Nemo Gefuna).
A ƙarshe, za mu ci gaba da haɗa tasirin
Za mu ci gaba zuwa ga launi cika Layer 1 kuma don wannan, muna danna shi dama kuma zaɓi zaɓi canza abu mai wayo. Yanzu, muna sake danna dama kuma zaɓi rasterize Layer.
Nan da nan bayan haka kuma yayin da muke riƙe Ctrl. mu danna kan thumbnail na mu Layer, inda za mu iya lura cewa mun yi zaɓi.
Da wannan, muna ƙirƙirar abin rufe fuska, wanda za mu ƙirƙira ta hanyar zaɓin abin rufe fuska na Layer wanda za mu iya sanyawa a cikin sassan layi. Zai yiwu a lura da canje-canje a cikin yadudduka ta hanyar haɗin gwiwar su.
Yanzu za mu zaɓi abin rufe fuska
Da zarar mun zaɓi shi, za mu ci gaba zuwa umarnin (Tace > Pixelate > Launi Halftone) don canza radius kawai. Muna aiwatar da umarnin (Ctrl+I) don musanya launukan abin rufe fuska, sannan mu canza yanayinsa (daga al'ada zuwa overlay), wanda yakamata mu sami hoton ban dariya a idanunmu.
Ban sha'awa! na gode sosai…
Sannu. A ka'ida koyawa tayi kyau sosai amma na tsaya a wannan bangaren da ban gane ba:
Filler don wasan kwaikwayo na mu
"Don wannan mataki, za mu ci gaba da ƙirƙirar layinmu na ƙarshe. Don yin wannan, za mu ci gaba da zaɓar kowane gefen Layer na mu, sannan mu je kan tashar Channels.
Ban gane ba "za mu ci gaba da zabar kowane gefen panel ɗin mu..."
Na gode don sharewa
Yana kama da ban sha'awa, amma ba a bayyana shi da kyau ba. Suna tsallake matakai da yawa.
Abin takaici, akwai kurakurai na edita a cikin rubutun. Kuma ba za a iya bin shi da kyau ba... Idan za ku iya dubawa kuma ku gyara shi, zan yi godiya sosai.
HAKA YAKE FARUWA GA NI KAMAR WASU.
Filler don wasan kwaikwayo na mu
Don wannan mataki, za mu ci gaba da ƙirƙirar Layer na ƙarshe. Don yin wannan, za mu ci gaba da zaɓar kowane gefen Layer na mu, sannan mu je kan tashar Channels.
Ba a fahimta ba.
An yi sa'a ya kasance a farkon koyawa